Intelligent Lithium Cutoff, 1-12s, Soft cutoff. Works with all ESCs. These have
been reprogrammed to cutoff at 3.3volt per cell. Now you can run lipos in your
supervee with the stock ESC and not damage or shorten the life of your lipos.
Just run till the cutoff kicks in, go to zero throttle and bring her in. No more need
for a stop watch or worrying how much juice you have left. For the price this is
a must have if you are running lipos. A great backup for any ESC. If you cant
solder get the pre installed Deans option. This also allows you to move the unit
rom one boat to another.     Made in USA  

Beautifully machined aluminum water jacket. Threaded hose fittings that wont
come loose like the glued in competitions not to mention the much larger hole
size. Improves water flow and surrounds the whole motor for much better cooling
which makes the motor run better and last longer. Fits any 540 size motor. 36mm
ID x 44mm long.    $16ea

5mm X .150inch   With out question the best collet on the market. Three piece
design for slip proof ultra secure grip by just snugging up the wrenches. High
precision machined stainless steel with a brass insert. You can not strip or split
this like the stock collet or the octura 2 piece units. Not only will this hold better it
will increase the life of your flex shaft. The brass inserts are replaceable if you would
ever wear it out so no need to buy the whole unit a second time.  
Made in USA  $16.00

For any motor with 5mm shaft. Helps prevent wear on motor bearings. Mount
between motor and collet.   $7.65ea Note: A spacer is needed for the SV27 motor.
Spacer is made to be used with any collet and reduce vibration caused by washers.

The only bullet nut made for the stock SV27. Made from solid brass or stainless
which is much stronger then aluminum and will not flake or rust like the plated ones.
These can be polished to a super high luster. Photographed raw. This makes the
boat look so much better and faster.  Made in USA.

This is probably the most popular tape for sealing up your hatch. Makes a nice
watertight seal. Leaves no residue and will not pull your decals when removing.  
 1 inch wide X 100 feet long.      $2.95 per roll

Colored electrical tape for sealing the hatch is my personal favorite. You can use this
tape more then once which is great for testing and setting up when you need to
check for leaks and check your temps. 3/4 wide x 50 feet long.

This is without question the best prop balencer on the market. Can be used on any
surface and does not need to be leveled. Will even work if you hold it in your hand.
All other balencers that use cones need balanced. Why buy a balencer that needs
balanced? Beautiful machined aluminum brackets with hardened tool steel shafts for
a no wear no bend unit. Another quality Kintec Racing product. Made in USA  $35.00

These help keep that little bit of water out when you put the boat on its lid.
Comes with 2 caps and 2 silicone antenna retaining collars.